RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.

Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.

Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.

As per the 2015 SRTOs Clause 1.8, RTOs are required to ensure their assessment systems, including RPL, meet training package requirements and follow the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The initial type of assessment validation ensures compliance with the training package assessment requirements within your RTO's scope.

The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.

This implies that we validate both prior to and following the assessment. The focus of this article is on the first type: assessment tool validation.

The Fundamentals of the Two Types of Assessment Validation

Defining Assessment Validation

As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, also referred to as assessment tool validation, is related to the first part of the clause, ensuring all unit requirements are addressed and workbooks are entirely compliant.

Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

This article will focus on assessment tool validation.

Methods for Conducting Assessment Tool Validation

Now that we’ve differentiated the two types of validation, let’s examine assessment tool validation in detail.

When is Assessment Tool Validation Conducted?

The aim of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

Thus, whenever new learning resources are purchased, assessment tool validation should be conducted before students use them.

You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.

However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:

- update your resources
- your scope includes new training products
- course is reviewed by you against training product updates
- your learning resources get identified as a risk during your risk assessment

ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.

What Training Products Need Validation?

Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.

Necessary Resources for Assessment Tool Validation

Academic Resources

Given that you are validating your assessment tools, you will need the complete array of your learning resources:

Mapping tool – this is the initial document to review. It identifies which assessment items address unit requirements, speeding up validation.

Learner/student workbook – ensure it's appropriate for use as an assessment tool. Check if instructions are clear and answer fields are sufficient. This is a frequent gap.

Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are included. Clear benchmarks are key to reliable assessment outcomes.

Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.

Panel for Validation

Clause 1.11 outlines the criteria for validation panel members, specifying that validation can be done by one or more people. RTOs typically require all trainers and assessors to participate, occasionally inviting industry experts.

As a group, your validation panel must possess:

Up-to-date vocational competencies and industry skills pertinent to the unit being validated

Current knowledge and skills related to vocational teaching and learning

Any one of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its equivalent

Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also serves as evidence that you have validated your resources before students use them.

While ASQA does not have a recommended or required template for assessment tool validation, many templates are available online. These tools generally require validators to review the tools as a whole to see if they meet the principles of assessment.

Principles of Assessment Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.

We recommend a more detailed template to inspect each unit requirement and the assessment items that correspond to them. Here is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Review?

As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.

Assessment Basic Principles
Fairness – Are equal opportunities and access ensured in the assessment process?

Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment produce consistent results every time, regardless of who conducts get more info the training? Will different assessors make the same decision on skill competence?

Rules of Evidence

Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there enough evidence to confirm the learner has the required skills and knowledge?

Authenticity – Is the assessment tool verifying that the work belongs to the candidate?

Currency – Do the assessment tools mirror current units of competency and modern industry practices?

Although these are commonly addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.

To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:

Live Up to Your Words

Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

diaper changing

bottle preparation, feeding babies from bottles, and cleaning equipment

prepare solid foods and feed babies

respond appropriately to baby signs and cues

prepare and settle infants for sleep

monitor and promote age-appropriate physical exploration and gross motor skills

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby is not sufficient.

Full or Not Competent

Pay attention to lists. As mentioned earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail

Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What can be included in a work package?

Answers can include:

Needed resources

Appropriate costs

Length of activities

Designated duties and responsibilities

If an assessment item demands multiple answers, specify the number of answers required from a student. This ensures your assessment is reliable, and the evidence obtained is valid.

This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:

Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.

Answers may include, but are not limited to:

Weather conditions – work area isolation, engineering, PPE

Work area and ground conditions – elimination, isolation, engineering controls

People – isolating, engineering controls, administration

Structural hazards – substitution, isolation, engineering controls

Chemical hazards – isolation, engineering, administration

Equipment or machinery – isolation, engineering controls, administration

Avoiding double-barrelled questions makes it easier for students to respond and for assessors to accurately judge student competence.

Given these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees require waiting for an audit to rectify noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.